Product Specifications - Hillrom HUG-U-VAC Manual De Instrucciones

INSTRUCTIONS FOR USE
e. It is recommended that this positioner be is used in conjunction with a rigid lateral
support in order to prevent patient injury or death in the event the product loses
vacuum.
f. Always ensure product is properly and securely fastened to the operating table
prior to use.
g. Secure positioners straps only to the operating table's accessory rails.
h. Never secure positioners straps to table width extenders or any secondary
accessory rails.
i. Always ensure the vacuum valves are securely closed and locked, and that the
positioner maintains vacuum prior to draping the patient or beginning any surgical
procedure.
j. Do not exceed the maximum patient weight limit or width as specified by the
manufacturer.
k. Not for use with K-Thermal heating pads or similar.
l. Once the desired form is obtained around the patient, DO NOT leave suction
applied to the device. Close the Hug-U-Vac valve and stop suction during the
procedure. After the procedure is completed, release the Hug-U-Vac valve and
allow air to return into the device.
m. Do not leave the Hug-U-Vac valve closed with suction still applied in between
procedures or in storage. Leaving the suction connected will lead to collapsing
and damage of the internal beads and thus, greatly reduce the life of the product.
n. Never exceed the weight capacity of the OR table.
o. Always lock valve close and remove suction tube.
CAUTION:
Do not exceed safe working load shown in the product specification table

Product Specifications:

Mechanical Specifications
Product Dimensions
Material
Document Number: 80028181
Version: B
Hug-U-Vac® Standard Lateral Positioner:
35"X 48" (89 cm x 122 cm)
Hug-U-Vac® Large Lateral Positioner:
32"X 36" (81.3 cm x 91.5 cm)
Devices are constructed from traditional
engineering materials including stainless steel,
aluminum, and padding is made from high and
low temperature polymers.
Page 19
Description
Issue Date: 27 MAR 2020
Ref Blank Template: 80025117 Ver. F