Using The Setup Menu; Editing Numerical Values - Keysight Technologies U1231A Guia Del Usuario

4 Multimeter Setup Options

Using the Setup Menu

The Setup menu allows you to change a number of nonvolatile preset features.
Modifying these settings affects the general operation of your multimeter across
several functions. Select a setting to edit to perform one of the following:
– Switch between two values, such as on or off.
– Cycle through multiple values from a predefined list.
– Decrease or increase a numerical value within a fixed range.
The contents of the Setup menu are summarized in
Table 4-1 Setup menu key functions
Legend
Max
Min

Editing numerical values

When editing numerical values, first press
the first numerical digit (most right digit).
Next, use the
– Press
– Press
100
Description
Press and hold while powering on the multimeter to access the Setup menu.
Press and hold for more than 1 second to exit this mode.
Press or to step through the menu items.
Press or at each menu item to change the preset settings. The menu item (in
Max
Min
the secondary display) will flash to indicate that you can now change the menu item
values.
Press or again to switch between two values, to cycle through multiple values
Max
Min
from a list, or to decrease or increase a numerical value.
While the menu item is flashing, press
While the menu item is flashing, press
and to move the cursor to the other numerical digit(s).
to move the cursor to the left, and
to move the cursor to the right.
Keysight U1231A, U1232A, and U1233A User's Guide
Table 4-2 on page 102.
to save your changes.
to discard your changes.
or to position the cursor over
Max
Min