Special Accessories; Maintenance And Care - Kärcher K 2.99 M Manual De Instrucciones

Disconnect the appliance from the water sup-
ply.
Detach spray lance from the trigger gun.
Briefly switch the appliance on ("I/ON"), press
the trigger gun lever until no further water is
discharged (approx. 1 min).
Switch the appliance switch to "0/OFF".
Use the safety catch to secure the trigger gun
lever.
Pull out the mains plug.
Roll up the power cord and loop it e.g. round
the handle.

Special accessories

Special accessories expand the possibilities of
using your appliance. Please contact your Kärch-
er dealer for further information.
Detergents
To ensure a trouble-free operation of the appli-
ance and to match the individual cleaning task, we
recommend our Kärcher detergent and mainte-
nance agents. Please ask for our advice, or re-
quest information on the products.

Maintenance and care

Risk of electric shock
Always switch off the appliance and pull out the
mains plug before care and maintenance work.
Cleaning
Prior to longer periods of storage, e.g. in the win-
ter:
Remove filter from suction hose for detergent
and clean with running water.
Pull out filter in water connection using flat-
nose pliers and clean with running water.
Maintenance
The appliance is maintenance-free.
Frost protection
Risk of frost
Protect the appliance and accessories against
frost.
The appliance and its accessories can get de-
stroyed through frost if there are any water resi-
dues in them. To avoid damage to them:
Store the appliance and the entire accesso-
ries in a frost-safe room.
All manuals and user guides at all-guides.com
Only use original Kärcher spare parts. You will
find a list of spare parts at the end of this docu-
ment.
You can rectify minor faults yourself with the help
of the following overview.
If in doubt, please consult the authorized custom-
er service.
Always switch off the appliance and pull out the
mains plug before care and maintenance work.
Repair works may only be performed by the au-
thorized customer service.
Appliance does not start
Pressure does not build up in the appliance
Strong pressure fluctuations
HP pump leaking
No detergent infeed
Spare Parts
Faults
Risk of electric shock
Warning
Check whether the voltage indicated on the
type plate corresponds to the voltage of the
socket.
Check the power cable for damage.
Check the setting at the spray lance.
Evacuate air from the appliance: Switch on
the appliance when the HP hose is not con-
nected and allow it to run until the water which
discharges from the HP outlet is free of bub-
bles. Then connect the HP hose again.
Clean the filter in the water supply connection:
This can be easily removed using flat-nose
pliers.
Check all supply lines to the HP pump for
leaks or blockages.
Clean the high-pressure nozzle: Remove dirt
and debris from the nozzle bore with a needle
and rinse through with water towards the
front.
Check the volume of incoming water.
Slight leakage from the HP pump is normal. If
the leakage increases contact the authorized
customer service.
Select the low-pressure setting for the spray
lance.
Clean the filter of the detergent suction hose.
Check the DT suction hose for kinks.
11
English