Tabla de contenido
Idiomas disponibles
Idiomas disponibles
the requirements)
•
The isolating switch will be easily accessible to the customer with the hob installed
•
You consult local building authorities and by-laws if in doubt regarding installation
•
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the hob.
When you have installed the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers
•
There is adequate flow of fresh air from outside the cabinetry to the base of the hob
•
If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed
below the base of the hob
•
The isolating switch is easily accessible by the customer
BEFORE LOCATING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
ADJUSTING THE BRACKET POSITION
Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after insta-
llation.
Adjust the bracket position to suit for different table top thickness.
A
screw
B
C
bracket
screw hole
D
base
40
Tabla de contenido
