Safety Warnings; Intended Use; Technical Data - Festool UG-CSC-SYS Manual De Instrucciones

English
1 Symbols
Warning of general danger
Read the operating instructions and
safety instructions.
Risk of pinching fingers and hands!
Risk of tripping!
Do not climb
Do not saw shovel and plate.
Hand cart position
Working position
Can be loaded as a work bench up
to 100 kg (220.5 lb).
Can be loaded as a hand cart up
to 80 kg (176.4 lb).
Handling instruction
Tip or advice
Do not dispose of it with domestic
waste.
2

Safety warnings

WARNING! Read all safety warnings,
instructions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Remove the mains plug from the socket
–
and/or the battery pack from the power
tool before choosing settings on the
underframe. Some accidents are caused by
power tools starting accidentally.
– Set up the underframe properly before
positioning a power tool. Correct setup is
important in order to avoid the risk of the
10
mobile saw table and work bench
collapsing.
– Ensure that the power tool stands
securely on the underframe before using
it. If the electric power tool slips on the
work bench, you may lose control of the
power tool or the workpiece.
– Place the underframe on a solid, even and
horizontal surface. If the underframe
slides or wobbles, it may not be possible to
control the power tool or the workpiece
safely and reliably.
Do not overload the underframe and do
–
not use this as a climbing aid or stool.
Overloading or standing on the underframe
may shift the centre of gravity of the under­
frame and cause it to tip over.
Observe the operating manual of the
–
power tool being used. Non-compliance
with the safety warnings and the maximum
workpiece dimensions make the machine
unsafe and may lead to accidents.
Do not use the machine to transport
–
people or as a toy. Children need to be
supervised to ensure they do not play with
the machine.
– Do not saw into the plastic parts of the
shovels or into the plate. A damaged
shovel or plate may break. This means a
risk of injury.
3

Intended use

The underframe UG-CSC-SYS is provided and
intended
– as an underframe for the CSC SYS 50 EBI,
– for transporting multiple Systainers on top
of one another like a hand cart,
– as a work bench.
Another half-stationary machine may only be
operated on the underframe UG-CSC-SYS if its
stand area is safely within the [7-1] range.
The user is liable for improper or non-
intended use.
4

Technical data

under­
frame
Table
dimensions
(L x W)
Transport
dimensions (42-3/64 x 22-53/64 x 9-15/32")
UG-CSC-SYS
580 x 580 mm
(22-53/64 x 22-53/64")
1068 x 580 x 240 mm