Wi-Fi Function; Window/Door Open Function - Olimpia splendid CALDO UP T WIFI Instruccioes Para La Instalación, Uso Y Mantenimiento

To activate this function, switch on the appliance; ambient temperature is shown on the
display and the "WIFI" LED blinks waiting for connection to the device.
When the device is connected to the appliance, the "WIFI" LED remains steady.
To deactivate this function, keep the START/STOP key (12) pressed for approximately
3 seconds until the appliance emits a Beep and the "WIFI" LED flashes.
The instructions for connection to the WiFi network and for
use of the App are available on the website
www.olimpiasplendid.com in the download area.
If enabled, the WINDOW/DOOR OPEN function allows the appliance to detect an
abnormal amount of cold air in the room.
In this condition, when the appliance is in heating mode or in set temperature mode
(the function is cannot be activated in functioning as fan), if it detects an ambient
temperature reduction by a few degrees, the function activates.
Each time the appliance is electrically connected, the WINDOW/
DOOR OPEN function is deactivated.
If this function is disabled, the appliance works normally.
Temperature detection starts 1 minute after the open window/door detection.
The function activates with a round which lasts 10 minutes and every 5 minutes the
appliance detects ambient temperature to check if the window/door has been closed.
If, during the checks, the appliance detects:
• a difference of ≤8°C compared to ambient temperature, it keeps heating and the
open window/door detection continues,
• a difference of >8°C compared to ambient temperature, it stops heating and
switches to stand-by mode and the open window/door detection stops.
This function can only be activated through the app.
EN - 20

9.8 - Wi-Fi function

9.9 - Window/Door open function