General Specifications - Klein Tools 501-915 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 37

/ 37
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

ENGLISH

The Klein Tools Cable Length Meter is a portable time domain

reflectometer (TDR) cable length meter. It measures cable length,

calibrates Velocity of Propagation (VoP) values, finds faults in cables,

and provides tone generation for cable tracing.

• Environment: Indoors

• Operating Altitude: 10000 ft. (3050 m)

• Relative Humidity: <90% non-condensing

• Operating Temperature: 32° to 122°F (0° to 50°C)

• Storage Temperature: -4° to 140°F (-20° to 60°C)

• Input Protection: 30V peak 50/60Hz AC or DC

• Common Cable Length Ranges:

Data: 0 to 1500' (0 to 457 m) Electrical: 0 to 1000' (0 to 305 m)

• Measurement Method: Time Domain Reflectometry

• Measurement Units: Feet, meters

• VoP Range: 0 to 99.9%

• Accuracy: ± (2% + 3 ft. or 1 m) with known VoP and consistent

cable parameters

• Tone Generation: Constant: 1200Hz, Alternating: 1000/1500 Hz

• Batteries: 2× AA alkaline

• Battery Low Level: Approx. 2.2V

• Battery Life: Active: Approx. 15 hours Standby: Approx. 3 years

• Auto Power Off (APO): Test Mode: 5 to 20 minutes (default = 10 min.)

• Dimensions: 6.2" × 2.6" × 1.2" (15.7 × 6.6 × 3.0 cm)

• Weight: 12.0 oz. (340 grams) with batteries

Specifications subject to change.

To ensure safe operation and service of the meter, follow these

instructions. Failure to observe these warnings can result in

severe injury or death.

• The Cable Length Meter should NOT be used on energized cabling systems.

• Internal components of the Cable Length Meter are protected up to 30V

peak AC or DC. Connecting the meter to voltages above this range may

pose a safety hazard to the user and the meter.

Warning: Potential for personal injury.

Caution: Potential for damage or destruction to equipment.

Always wear approved

eye protection

Do not place equipment and its accessories in the trash. Items must

be properly disposed of in accordance with local regulations.

UKCA - United

Kingdom

Conformity

Assessment