Troubleshooting Table; Declaration Of Conformity - Worx WG324E Manual De Instrucciones

7. TROUBLESHOOTING TABLE

The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
WARNING: Switch off and remove the battery pack before investigating fault.
Symptom
Pruning saw fails to
operate
Pruning saw
operates
intermittently
Chain/chain bar
over-heats
Pruning saw rips,
vibrates, does not
saw properly
8. DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Description Battery-powered pruning saw
Type WG324E WG324E.X WP342E WP342E.X
(3-designation of machinery, representative of
battery-operated pruning saw)
Function Cutting wood
Complies with the following Directives:
2006/42/EC, 2014/30/EU,
2011/65/EU&(EU)2015/863,
2000/14/EC amended by 2005/88/EC
The notified body involved
Name: SGS Fimko Ltd
Address: Takomotie 8, FI-00380 Helsinki,
Finland
Certification No.: MD-237
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 88.11 dB(A)
- Declared Guaranteed Sound Power Level 91 dB(A)
Standards conform to
Cordless Pruning Saw
Possible Cause
Out of battery.
Fuse faulty.
Over heating
Applying too much pressure
while cutting.
Loose connection.
Internal wiring defective.
On/Off switch defective.
Chain is over tensioned
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the
wrong direction
Remedy
Charge the battery pack.
Replace fuse.
Place the machine in a cool, ventilated
place to cool it down
Applying relatively less pressure while
cutting
Contact service agent.
Adjust chain tension
Sharpen chain or replace
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
EN 62841-1, EN 12100, EN ISO 3744, EN 55014-1,
EN 55014-2, Parts of EN ISO 11680-1
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2022/03/24
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
21
EN