Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Care and Maintenance
Before cleaning or maintenance switch off and remove the battery pack.
Warning:
Do not use water, solvents,
pr polishes to clean the
outside of the unit. Wipe
with a dry cloth.
• Each week clean the product with a dry cloth, including under the bin.
• Remove hair and fibre from the brush bar, cutting along the brush with scissors can help,
but be careful not to cut the bristles.
• Do not pick up liquids or use on wet floors.
• Don't use on concrete, tarmacadam or other rough surfaces.
• Do not pick up pieces of string or fabrics.
• Do not use on rug tassels or frayed carpets.
• Do not store or charge the appliance outdoors.
• Store indoors in a dry place.
• Store out of reach of children.
• Any other maintenance or servicing not included in the manual should be performed by an authorized
service representative.
Troubleshooting
Problem
Possible Reason
Poor cleaning and
1. Dust bin full.
dust pick up.
2. Dust bin not correctly fitted to unit.
3. Filter not correctly fitted to unit.
4. Filter dirty.
Unit will not operate.
1. Battery discharged.
2. Brush Bar jam.
Unit stops during
1. Battery discharged.
use.
2. Brush bar jam.
Unit will not charge.
1. Check the charger is correctly
connected to the battery and socket.
2. Check that there is power going to the
wall socket.
Warning:
Never immerse the unit in
water and do not clean in a
dishwasher.
Possible Solution
Remove and empty dust bin.
Check dust bin is correctly fitted.
Check filter is correctly fitted.
Clean filter.
Charge battery.
Remove battery.
Remove debris.
Charge battery.
Remove battery.
Remove debris.
If the vacuum still does not start, please call the Gtech Customer
Services Helpline.
If socket is faulty consult a qualified electrician. If the product still
does not charge, please call the Gtech Customer Services Helpline
on 1-855-483-2440
english
Warning:
Never use the unit without
the filter fitted.
7
Tabla de contenido
