Vibration Specifications; Scope Of Supply; Safety Devices; Use According To Intended Purpose - Mafell K 65 cc Manual De Instrucciones

2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2

Vibration specifications

The typical hand-arm vibration according to EN 62841 is less than 2.5 m/s

2.5 Scope of supply

Portable circular saw K 65 cc complete with:
1 carbide-tipped circular saw blade Ø 185 mm (7 9/32 in.), 24 teeth
1 riving knife / splitter (thickness 1.5 mm / 0.06 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety instructions"
1 carrying case only for item No. 91B002, 91B030, 91B031, 91B032
1 parallel stop
Cross-cutting system KSS 60 cc complete with:
1 carbide-tipped circular saw blade Ø 185 mm (7 9/32 in.), 32 teeth
1 riving knife / splitter (thickness 1.5 mm/ 0.06 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety instructions"
1 carrying case only for item No. 91B102, 91B130, 91B148
1 parallel stop

2.6 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
- Upper stationary saw guard
- Lower retractable saw guard
- Large base plate
- Handles
L = 93 dB (A)
PA
K = 3 dB (A)
PA
L = 103 dB (A)
WA
K = 3 dB (A)
WA
- Riving knife / splitter
- Index mechanism and brake
- Hose connector

2.7 Use according to intended purpose

The K 65 cc / KSS 60 cc is exclusively suited for
longitudinal and cross cutting of solid wood.
Panel materials such as chip board, core board and
medium density fibre board can also be processed.
Use approved saw blades according to EN 847-1.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
-22-
.
2