Active OLIVATOR E1200 L Manual De Empleo Y Mantenimiento página 21

The battery, not provided, must never be connected to the battery charger while used.Now you
can switch ON (-N) and start operating the machine.
Now you can switch ON (-N) and start operating the machine.
Use only 12V batteries. Do not use the machine with low battery.Outside temperature
between +1°C and +40°C.
Cod. E4800 L HD - E4800 XL HD Ref. fig. C. 2
Codes E4800L- E4800XL E4800L HD - E4800XL HD Ref. fig. C.2
Before connecting the machine to the battery check the operating switch -N- in the OFF position.
Then proceed as follows:
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at
the end of the extension cable -S- and screw it.
Insert the other connector -F- of the long cable S into the socket -G- on the electronic box -B-.
Connect the electronic box -B- to the battery,12-24V, through the 2 nippers, the red one on the
positive (+) and the black one on the negative (-).
The battery, not provided, must never be connected to the battery charger while used.
Now you can switch ON (-N) and start operating the machine.
Maximum tension on the electronic circuit 29V. Over this vale the circuit could be damaged.
Minimum tension from the battery 8V.
Outside temperature between +1°C and +40°C.
Codes E4800BPL HD-E4800BPXL HD - Ref. fig. C.3
5. OLIVE HARVESTER USE
Before connecting the machine to the battery check the operating switch -N- in the OFF position.
Then proceed as follows:
Cod. E1200 L - E1200 XL Ref.fig. D (fig. D.1, D.2)
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at
the end of the extension cable -S- and screw it.
The machine power supply is provided by lead acid accumulator - 12V battery - 70÷80Ah (not included)
Insert the other connector -F- of the long cable S into the socket -G- on the electronic box -B-.
that, through a 10m long power cable with clamps for the connection to the battery, can give power directly
The power supply B is connected to the knapsack battery H.
to the motor of the machine. Since there is no adjustment of the supply voltage, the motor rotation speed is
Switch on the battery with the J switch.
maximum when the battery is charged, and decreases slightly while the battery is discharging. This situation
The battery must never be connected to the charger while used.Now you can switch ON (-N)
is normal. When the tines rotating speed reduces intensely, you have to switch off the machine and charge
and start operating the machine.
the battery. It is very important to connect the clamps of the cable to the battery when the switch is off, to
Now you can switch ON (-N) and start operating the machine
avoid the machine starts working suddenly.
Always turn off the switch every time you need to stop the machine or disconnect a cable. In case of
The electronic box of E4800 BPL HD - E4800 BPXL HD must be connected ONLY to the original
overloading, with excessive effort of the head among the branches, the motor stops automatically in order to
ACTIVE battery.
protect all the parts of the machine. Waiting for a few minutes, the machine re-star working automatically. If
ACTIVE battery characteristics: nominal voltage 32V – Capacity 10Ah.
such a security system activates frequently, it means that the impact of the machine with the tree branches
Outside temperature between +1°C and +40°C.
is too violent and, therefore, it is necessary to use the harvester with more regularity.
5. OLIVE HARVESTER USE
Cod. E4800 L HD - E4800 XL HD Ref.fig. D (fig. D.1, D.2)
Codes E1200L- E1200XL
The machine power supply is provided by a lead acid accumulator – 12V battery - 70÷80Ah (not
In the event of an overload of the machine, with excessive strain of the head between the branches, the
included) that, through a 10m long power cable with clamps for the connection to the battery, can give
switch trips, the motor switches off automatically in order to preserve all parts of the machine. After a few
power directly to the motor of the machine. Since there is no adjustment of the supply voltage, the motor
seconds it is possible to reset the switch by pressing the button (fig. D2). If the intervention of this safety
rotation speed is maximum when the battery is charged, and decreases slightly while the battery is
system is frequent, it means that the use of the machine between the branches is excessively decisive and
discharging. This situation is normal. When the tines rotating speed reduces intensely, you have to switch
violent and it is therefore necessary to use the shaker more regularly.
off the machine and charge the battery. It is very important to connect the clamps of the cable to the
battery when the switch is off, to avoid the machine starts working suddenly.
Always turn off the switch every time you need to stop the machine or disconnect a cable. In case of
overloading, with excessive effort of the head among the branches, the motor stops automatically in
order to protect all the parts of the machine. Waiting for a few minutes, the machine re-start working
ACTIVE S.r.l. - Via Delmoncello, 12 - 26037 San Giovanni in Croce - CR
Tel. 0375/94172 www.active-srl.com email: [email protected]
21
22