Basic Operation - HP T500 Manual Del Propietário

All manuals and user guides at all-guides.com
200402046--HP UPS Owners manual_x2.qxd
Quick Installation
These connections are optional. Your UPS will function properly without these connections.
1 Phone Line
Surge Suppression
Your UPS has jacks which protect against
surges on a phone line.
Using telephone cords, connect your wall jack
to the UPS jack marked "IN." Connect your
equipment to the UPS jack marked "OUT."
Make sure the equipment you connect to the
jacks is also protected against surges on the AC
line.
USB Communications
2
Use any USB cable to connect the USB port of
your computer to the USB port of your UPS.
Refer to the software information card pack-
aged with your UPS for instructions on how to
download HP Power Manager software from
the Internet. Install HP Power Manager on the
connected computer to monitor, manage and
control the UPS.

Basic Operation

Buttons
Use the ON/OFF button to do three things:
Switch your UPS's Operating Mode: While your UPS is plugged
into a live AC outlet, press the ON/OFF button and hold it until you
hear a beep (about 2 seconds) to toggle between the following operat-
ing modes. Choose your UPS's operating mode based on the regional
guidelines in Step 3 of the Quick Installation section.
• UPS Mode: ENABLES battery backup. UPS Conditions: The UPS
charges its battery and supplies power at its receptacles when it is
receiving utility line power. If utility power fails, the UPS provides
power from its batteries. The "
Advantages: Provides battery backup during blackouts or brownouts.
3/11/2004 5:16 PM
optional
1
2
" indicator light is lit. Setting
4
Page 4
NORM DELAY
NORM DELAY