Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical data
Model:
Dimensions (l x w):
Ceramic
Seat
Total weight:
Seat ring and
lid material:
Installation instructions
GB
GB
Dear customer, you have purchased a product
of high quality and long service life from our
range. Please read this manual completely before
installation and follow the instructions. Please keep
the manual in a safe place and pass it on to any
subsequent owners. These installation instructions
can also be requested from our customer support
as a PDF file.
Intended use
The wall mounted WC with shower WC seat is
only suitable for indoor use. The product is used
for cleaning the anal area and cleansing the outer
vaginal area. It is intended exclusively for private use
and is not suitable for the commercial sector. Use
this product only as described in these operating
instructions. Any other use is considered improper
and may result in damage to property or even
personal injury. The manufacturer or dealer does not
accept any liability for damage caused by improper
or incorrect use.
Safety advice
• CAUTION ELECTRIC SHOCK! Before drilling,
make sure that there are no electrical cables in and
around the drilling location!
• CAUTION WATER DAMAGE! Please switch off the
general water supply before installation.
• Incorrectly mounted wall WCs with shower WC
seats can cause water damage!
Wall mounted WC with
shower WC seat (Manetti)
92101
37 x 53 cm
47 x 37 cm
approx. 23,5 kg
Thermoplastic
• CAUTION WATER DAMAGE! Before drilling, make
sure that there are no water mains at and around
the drilling location!
• Please have the installation carried out by only a
qualified plumber.
• Only approved for mains or potable water. Do not
use seawater, service water or rain water.
• Only use a cold water supply! Connecting the
appliance to a hot water supply may cause scalding
and damage to the appliance.
• The product is intended exclusively for use in
rooms with a temperature above 0°C. If there is a
risk of frost, interrupt the water supply.
• Do not twist the connection hose or tension it!
• Do not operate the product when it shows visible
damage.
• Do not bend the connecting hose and do not place
it over sharp edges.
• Despite automated production processes, the ma-
nufacturer of bathroom ceramics is still craftsman-
ship today. Many details are done by hand. During
the production of bath ceramics, the blanks are
fired at a very high temperature and lose about
10 % of their original size. Due to the production
steps just mentioned, tolerances are unavoidable.
• Before installation, inform yourself about the
suitable installation material. Suitable installation
material is included for installation on common
pre-wall elements.
• Even with careful production there can be sharp
edges. Please be careful.
• Please note that the seals are wearing parts which
must be replaced from time to time.
Operating instructions
• Do not expose to direct sunlight. Otherwise there
is a risk of colour changes.
• Do not sit on the product cover. Do not exert
excessive strain or impact on the toilet seat, place
heavy objects on it or step or stand on it. Otherwise
this can damage the product.
• Do not bend or twist the shower arm.
14
Tabla de contenido
