Transport; Delivery; In-House Transport; Lifting - Hupfer KWP Manual De Instrucciones

Operating Instructions
6

Transport

EN
CAUTION
Injuries caused by sharp edges
The mounting frame and base of the product, as well as the surface,
may have sharp edges.
►
Wear suitable protective gloves when transporting and
installing the product.
For transport, the hot and cold plate is packed and fastened on a
suitable pallet so that the surface is protected from damage caused by
scratches or stress cracks. The hot and cold plate can be stored on the
pallet until installation.
6.1

Delivery

The hot and cold plate is delivered by a freight forwarding company,
whose transport specialists are responsible for securing the load
during transport.
6.2

In-house transport

The hot and cold plate is permanently installed at the place of use in a
counter or similar structure.
When transporting the entire structure, it must be ensured that the
necessary supports within the structure cannot break away or warp.
6.3

Lifting

Lifting aids or slings may only be attached to the transport frame.
The hot and cold plate must not be lifted by the surface, but only by the
structure below.
Hot and cold plate
Page 14