To dispense ice manually
Untitled-1 35
1. Pull up the handle of the water bin to
open, and then fill the bin with water up
to the max line. Gently close the bin so
that water does not drop or leak.
CAUTION
• Do not exceed the max line. Excessive
water causes the ice to jam and not
dispense well.
• Use only potable water. Other liquids,
such as green tea or milk may not
dispense well.
• Gently close the water bin. Otherwise,
the water may drop or leak.
NOTE
• If you encounter a water leak, open the
water bin and check if the water bin's
passage to the ice tray is frozen. If this
is the case, pour lukewarm water into
the water bin up to the max line. Let the
passage melt.
• It is recommended to clean the water
bin's passage to the ice tray on a regular
basis because the passage is likely to
freeze.
2. Check if the ice freezes completely. Only
when the ice has frozen completely, pull
up the ice maker lever. Then, the ice
tray rotates and dispenses ice to the ice
bucket.
CAUTION
• Do not pull up the lever until the ice has
frozen completely. Half-frozen ice may
jam and damage the ice bucket.
English
35
10/14/2020 2:51:24 PM