cecotec BOLERO DRESSCODE 6000 Manual De Instrucciones página 58

ENGLISH
2. Open the water supply tap.
3. Load the washing machine with the laundry.
4. Close the door.
5. Add detergent (and softener if necessary).
Fig. 13
Note:
Detergent must be added in "case I" only after selecting pre-washing for machines with this
function.
Washing
1. Turn the device on.
2. Turn the knob to select the desired programme.
3. Select a function or use the default one.
4. Press Start.
Fig. 14.
Warning
If any of the default options is selected, step 3 can be skipped.
After washing
The appliance will beep, or the display will show "End".
Using the washing machine
Before each washing
- The washing machine should be operated within a temperature range of 0-40 °C. If used
under 0°C, the inlet valve and draining system may be damaged. If the machine is placed or
operated in rooms at 0°C or below, it should be transferred to normal room temperature to
ensure the water supply hose and drain hose are not frozen before use.
- Check the care labels and the product instructions when using detergent before washing.
Use non-foaming or less-foaming detergent suitable for machine washing.
- Check the label. Fig. 15.
- Empty the pockets of the clothes to be washed. Fig. 16.
- Knot the long strips or laces, close zips or tighten button. Fig. 17.
- Place small items in washing bags. Fig. 18.
- Turn easy-pilling and long-pile fabrics inside out. Fig. 19.
- Separate clothes with different textures. Fig. 20.
Detergent tank
Fig. 21.
Pull out the detergent dispenser to open it.
- Pres-wash detergent
58