Vetus CANNME7 Manual De Instalación Y Usuario página 29

10 NMEA2000 network
@ Quick Access > > Network
The CANNME7 is connected to the vessel's NMEA2000 network.As a
result of this, it can read data from other network devices.
The network menu is used to configure data sources, to obtain addi-
tional information about connected devices and to calibrate specific
data sources.
Take particular care when using this menu Changes can cause
the device to no longer work properly
10 1 Connected devices
@ Quick Access > > Network > Connected devices
This menu shows a list of all devices connected to the network.
Select a device for more details. At the bottom of the device details is
the option to reset the configuration for this device.
Externally connected VETUS devices may have an option to upgrade
the software. Ask your local dealer for further information.
Select the "Check update" item to edit and follow the instructions
provided.
A physical device may contain several virtual devices which can be
presented to the network. You can see these virtual devices if you
press the "Virtual devices" item.
10 2 Data sources
@ Quick Access > > Network > Data sources
In this menu, the data sources for the various parameters can be set.
Some items are set to Auto Select, which means that the source is au-
tomatically allocated on the basis of the connected network device.
Installation and user manual CANNME7 Multifunctional, multi touch display
W
arninG
Check and change if necessary the following settings:
Jog wheel
Auto select (---)
Engine*
Auto select (ENGINE - PORT(1))
Electric motor powertrain*
BATTERY - PORT(1)
Depth
Auto select (---)
Water ref. speed
Auto select (---)
GPS
Auto select (INTERNAL GPS(1))
Inside temperature
None
Outside temperature
None
Water temperature
Auto select (---)
Fresh water
Auto select (---)
Black water
Auto select (---)
Rudder
Auto select (---)
Audio
None
Compass
Auto select (---)
Main battery set**
BATTERY MAIN
Battery 1**
None
Battery 2**
None
Battery 3**
None
Battery 4**
None
Originates from: *CANV2N
10 3 Calibration of network equipment
@ Quick Access > > Network > Device calibration
Network equipment must be calibrated by an engineer!
Some equipment connected to the network must be calibrated. For
example, the motor's temperature limits and the maximum rpm
must be provided.
ENGLISH
**CANNS500
W
arninG
371001.01
29