Kenmore PG-40409S0LB-COSG Manual De Uso Y Cuidado página 22

Grill Head to Cart
4
 This step requires two people to lift and position grill head onto cart.
 If not already done, remove the tie wrap and packing material from regulator hose, side burner valve
and igniter wires. Pull hose and igniter wire out to side of grill head.
 Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are hanging
outside the cart. Open lid and attach head to cart with(4) M6x13 screws and M6 compression washers.
(See A & B)
 Align back rail holes with holes on side panels and firebox. Attach back rail with (4) M4x10 screws.
(See C)
M6x13 Screw
Qty: 4 pcs
A
M6 Compression Washer
Qty: 4 pcs
C
B
22
M4x10 Screw
Qty: 4 pcs