Whalen SPUS-ASHF-BM Manual De Instrucciones página 9

Release lever
U
10. Pick up the Ball Bearing Slides (U) and separate the slide runners for the following step. Extend the slide
runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the slide
runner complete out.
11. Using the pilot holes as a guide, attach the separated Slide Runners (U) to the File Drawer Left and Right
Sides (N and O) respectively with three 14 mm Screws (6) per slide runner.
12. Securely screw the Cam Bolts (3) into the designated small holes on the File Drawer Front (L) using a
Phillips screwdriver.
File Drawer Assembling
Mounting holes
UP
The open end points toward the edge with
two mounting holes running against
3
3
L
9
U
6
U
N
3
3
6
U
O
Open end