Whalen SPUS-ASHF-BM Manual De Instrucciones página 6

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (3) into the designated small holes on the Utility Drawer Front (G) using a
Phillips screwdriver. DO NOT overtighten the Cam Bolts.
NOTE: Screw-in cam bolts must be screwed down flush.
Grooves line up with
each other and face inward.
3. Insert two Small Wood Dowels (4) into the pre-drilled holes on the ends of Utility Drawer Front (G).
4. Attach the Utility Drawer Side Panels (I and J) to the Utility Drawer Front (G) by engaging two Small
Cam Locks (1). (Refer to page 3 on Cam Lock system operation supplement).
Upper Drawer Assembling
3
G
J
4
6
3
1
I
4
G