Delay End - Infiniton WM-62MC Manual De Usuario

Prewash
Suitable for heavily soiled (e.g., soil, dust). The programme is prolonged for
20 minutes.
Spin
The programme defaults to the partial max. spin speed.
Press buttons to select other spin speeds.
lf spin speed "
only dewaters before the end of programme.
Temp.
Each programme is corresponding to its default temperature. lf needed, press
"Temp." button to adjust.

16.3 Delay End

Delay End function allows to run the machine at the consumers convenience, for
example, at night when electricity is cheaper.
Select programme, temperature and options.
ln standby mode, press and hold "Temp."+"Spin" to enter or cancel the Delay
end mode, press "Temp." to reduce the reservation time, and press "Spin" to
increase the reservation time. After reservation function is selected, "Temp."
and "Spin" can no longer change the program slave parameters. Each time
the key is pressed, time changes for 3 hour.Reservation time is 3 to 12
hours.After reservation is set, if other parameters such as temperature,
rotating speed or function are adjusted, reservation will be cancelled. When
rotating the knob to change program, reservation will be cancelled.Reservation
time is the time when it ends, i.e. washing time is included, so reservation time
must be more than washing time.
The Delay End indicator light stays on when the programme starts.
When the time counts down to the total wash time, the Delay End indicator light turns
off and the washing starts.
To cancel Delay End, turn programme selector to another programme position,
before pressing "Start/Pause" button.
16.4 Programme Start
Switch on and select programme required and corresponding function keys, then
press the "Start/Pause" button to run the programme.
16.5 Reload in process
Press "Start/Pause" button to reload clothes in the process of washing.
lf the door can be opened in the process, door lock indicator light will flashes. Until
door lock indicator turns off, you can open the door to load clothes.
" selected, the last spin process will be canceled and the machine
21
21