12. The heater has hot and arcing or sparking parts inside. DO NOT use it where
there is gasoline, paint, or flammable liquids.
13. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or injury.
14. Always plug heaters directly into a wall outlet/receptacle. Never use it with an
extension cord or reloadable power tap.
15. Do not burn wood or other materials in this heater.
16. Do not strike the glass of the fireplace.
17. The installation of circuit and socket shall be conducted by certificated
electrician.
18. When transporting or storing the heater, take care to keep both the unit and
power cord/plug dry. Keep it free from excessive vibration and away from heat
sources.
19. This appliance is equipped with an overheat protection safety device. Should
the appliance begin to overheat for any reason, it will automatically turn off all
heater functions. The appliance must be reset before using it again. To reset the
overheat protection safety device, turn off all controls, replug the appliance in 15
minutes and turn it on.
20. Please use a socket with a good fuse and ground electrode.
21. Please ensure the earth leakage protection is always connected in accordance
with the electrical circuitry code.
22. Please pull out the power plug when cleaning, maintaining or moving the
fireplace.
23. In order to avoid overheating, do not cover the heater.
You will need this manual for safety instructions, operation procedures,
and warranty. Put it and the original invoice in a safe, dry place for future
reference.
Reminder : Please pay attention to the operation steps and technical
specifications.
Warning:Operating instructions shall be followed strictly; otherwise, the
fireplace may be damaged.
Warning: Operating instructions shall be followed strictly; otherwise, it
may cause fire, serious injury, disease or dead.
SAVE THIS MANUAL
4