Sekey Home 3002 Manual De Instrucciones página 12

Press the button E(+) or F(-) to adjust temperature. If the set temperature is higher
than the room temperature detected by appliance, the heating starts. The heating will
not start if the set temperature is lower than the room temperature.
Celcius/Fahrenheit Setting:
The default temperature readout is Celcius. Long press button D(MENU) for 3 seconds
then press the button E(+) or F(-) to change the temperature readout from Celsius to
Fahrenheit.
Brightness Control
Brightness Control is to select the desired flame brightness level.
At the default interface, Press and hold button D(MENU) to select Brightness Control,
it's displayed "bri" and flashing light bulb icon as shown below:
Press OK button to start the brightness setting. Press button E(+) or F(-) to select the
brightness level.
5 brightness levels are selectable. The default setting is 3. 5. The highest level as
shown as shown below:
Regular Timer
At the default interface, Press and hold button D(MENU) to select the regular timer, it's
displayed "Hour" and flashing timer icon as shown below:
Press OK button to start the regular timer setting.
Press the button E(+) or F(-) to select the desired time.
The time sequence will read 00-30min, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H and 9H. The
default setting is 00 as shown below:
9