Sekey Home 3002 Manual De Instrucciones página 11

Heating ON/OFF
Quick Start of Heating Mode
Press button E (+) or F (-) to quick start the heat setting (Even though it's in the weekly
program) as follows:
a. Press either button E (+) or F (-) to see the current temperature on the screen.
b. Press button E (+) or F (-) to adjust the temperature as desired. Press button C (OK)
to validate the setting. If the set temperature is higher than the room temperature
detected by appliance, it starts hearing. And it will not heat when the room temperature
is higher than the set temperature.
NOTE:The settable temperature ranges from 10°C to 30°C. OFF means no heating
and ON for continuous heating.
LOW/HIGH HEATING & TEMPERATURE SETTING
High Heating
On the default interface, press button D (MENU) to display H and flashing heating icon
as follows:
Press OK button to set the temperature. The default temperature is 10°C (50°F). It's
displayed as follows:
Press button E (+) or F (-) to adjust the temperature. If the set temperature is higher
than the room temperature detected by appliance, it starts hearing. And it will not heat
when the room temperature is higher than the set temperature.
Low Heating
At default interface, press the button D(MENU) twice to display L and flashing heating
icon as shown below:
Press OK button to set temperature. The default temperature is 10°C(50°F). It's
displayed as shown below:
8