Sekey Home 3002 Manual De Instrucciones página 14

minutes and keep the temperature dropped for no less than 20 minutes.
To restart the heating, adjust the set temperature then press the OK button to validate
the setting. The Open Window Detection Mode will be OFF after reset the temperature.
2) Time Setting
Press and hold the button D(MENU) to select Mode menu.
Press OK to validate, then button E(+) or F(-) to enter Time Setting. It's displayed
"TIME" as shown below:
Press OK to validate, then press the button E(+) or F(-) to select day. D1 for Monday,
D2 for Tuesday, D3 for Wednesday, D4 for Thursday, D5 for Friday, D6 for Saturday
and D7 for Sunday.
Press OK to validate the day, then button E(+) or F(-) to set the time(hour).
Press OK to validate the hour, then button E(+) or F(-) to set the time(minute).
Press OK to validate the time setting.
To exit the setting during operation, press the button D(MENU).
If icon permanently flashes, this indicates that the time is offset following a power
cut. It's flashing as a time has not been set.
3) Weekly Programming
The time must be set before any programming.
3 pre-set programs are available. Each program includes a time period or several time
periods during which the electric fireplace is under heating mode. Outside of the time
periods, the electric fireplace is non-heating.
The time period of one program may overlap the time period of another.
Program Definition:
P1 as Program 1:
Monday to Friday from 05:15 for 4 hours high heating, and Saturday to Sunday from
06:20 for 4 hours low heating.
11