Card remote commander RM-X49 (CDX-6500 only)
OFF
SOUND
DSPL
PRST
VOL
DISC
REW
ATT
When the POWER SELECT function is set to on, the unit cannot be operated with the card
remote commander unless (SOURCE) on the unit is pressed or a cassette is inserted to activate
the unit first.
Replacing the lithium battery
When the battery becomes weak, the range of
the card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery.
µ
SOURCE
MODE
FF
SEEK
AMS
+ side up
The corresponding buttons of the card
remote commander control the same
functions as those on this unit.
1 OFF button
2 SOUND button
3 DSPL button
4 VOL button
5 PRST/DISC button
6 ATT button
7 SOURCE button
8 MODE button
9 SEEK/AMS button
Notes on lithium battery
• Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
WARNING
The battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
5