NORAUTO NS-218 DBT Manual página 103

To redial number
1 Press on front panel to redial.
2 The unit will display [CALLING], and the unit starts dialing the
number dialed last time.
Remark:
To make an outgoing call on this unit, the bluetooth connection
between the unit and the phone must be active.
Receiving a Call
1 If there is incoming call, the phone number is displayed. If the
incoming call has no phone number, [PHONE IN] is displayed.
2 Press
to answer/accept the call.
3 When conversation ends, press
Call Transfer
You can transfer voice from loudspeaker to mobile phones during
call.
During talking, press and hold
to mobile phone.
Bluetooth Audio Streaming A2DP
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored on
the device through the unit. If the device also supports Audio Video
Remote Control Profile (AVRCP) profile, you can use the control on
the unit or its remote control to play music stored on the device.
1 Press SRC repeatedly to select [BT AUDIO].
2 Press
to start play, press it again to pause.
3 To track up/down, press
to terminate the call.
voice transfers from loudspeaker
.
/
EN
103