Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
Use of dispensing type of crawling pump
CODIGO 80418 REV 0
Set the Stop Time
1. Click the Stop Time quantity value, will show a small
8.3 Set the Stop Time
keyboard, then input your interval time
1. Click the Stop Time quantity value, will show a small keyboard, then
2. Time Range: 0.1sec-9999min
input your interval time
3. Units:sec(second), min (minute)
2. Time Range: 0.1sec-9999min
4. Stop time value is to set the interval time between two
3. Units:sec(second), min (minute)
fillings; it can be only set when the filling is stopped.
4. Stop time value is to set the interval time between two fillings; it can be
5. During the filling period, the stop time cannot be set
only set when the filling is stopped.
6. With countdown display function
5. During the filling period, the stop time cannot be set
7. Set the keyboard:
6. With countdown display function
7. Set the keyboard:
Pause time:
Max
:9999
1
4
7
0
8.4 Set the Filling Number
1. Click on the Filling Number quantity value, will show a small keyboard,
and then input your filling number
2. Range: 0-9999 times, 0 on behalf of the infinite time
Set the Filling Number
3. When the filling stop you can click on the input value, but if the drive
1. Click on the Filling Number quantity value, will show a
running, you can't click on the input value
small keyboard, and then input your filling number
4. Set the keyboard:
2. Range: 0-9999 times, 0 on behalf of the infinite time
3. When the filling stop you can click on the input value, but if
Copy number:
the drive running, you can't click on the input value
4. Set the keyboard:
Max
7
1
4
7
0
PUMP TUBE SELECTION
Select the current use of the pump tubing models
Turn on the power, enter the initial interface, Click Settings, enter the setup
menu; Click System Set, enter the system setup menu; Click Tube, enter
the pump tube selection menu; then choose your current pump Tube. Click
PUMP HEAD SELECTION
Enter, save and exit;Click Cancel, exit without saving. (if you just want to
Select the current use of the pump head models
change the tubing which the same pump head use, you can just enter the
Turn on the power, enter the initial interface, Click Settings, enter the setup
Pump tube selection menu, to choose the suitable model).
menu; Click System Set, enter the system setup menu; Click Head, enter
the pump head selection menu; then choose your current pump head. Click
Enter, save and exit;Click Cancel, exit without saving.
PUMP TUBE SELECTION
Select the current use of the pump tubing models
Turn on the power, enter the initial interface, Click Settings, enter the setup
menu; Click System Set, enter the system setup menu; Click Tube, enter
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
the pump tube selection menu; then choose your current pump Tube. Click
e-mail: [email protected] - website: http://www.grupo-selecta.com
Enter, save and exit;Click Cancel, exit without saving. (if you just want to
change the tubing which the same pump head use, you can just enter the
Pump tube selection menu, to choose the suitable model)
min
124.5 s
2
3
5
6
8
9
.
OK
Pause time setting interface
Intelligent dispensing type peristaltic pumps
Product Introduction
t
:9999
2
3
5
6
8
9
.
Copy number setting interface
Pump Menu operation method
11/2021
Pause time
Min
s
:0.1
range
C
Delete
U
Unit setup
Esc
Exit
Confirm
Min
t
:0
Copy number
range
1241t
C
Delete
Esc
Exit
OK
Confirm
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 19
Tabla de contenido
