Warranty Disclaimer - Hama PD20-HD Instrucciones De Uso

• In the event that no device is connected, the power pack switches itself off automatically.
Warning - Connection of devices
• Before connecting a device, check whether it can be adequately supplied with the power pack's
current delivery.
• Ensure that the total current consumption of the connected device does not exceed 3000 mA.
• Note the instructions in your device's operating manual.
• You must obey the instructions and safety notes contained therein regarding the supply of
power to your devices.
• The power pack must not be charged and discharged at the same time!
• Please do not charge simultaneously at both the USB-A and USB-C outputs since this
significantly reduces the charging current. The charging period increases significantly as a result
and the power pack may, in certain circumstances, become overloaded.
Note - optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with
the ideal current strength and therefore reduces the charging time to a minimum. Note that the
power pack's maximum current delivery is 3000 mA.
Warning
• Never connect the power pack's charging cable to its input and output simultaneously. This can
damage the battery.
• Do not connect any devices during the power pack charging process. Doing so can damage the
power pack and connected devices.
Note - Power Delivery / QC 3.0, 2.0
• Plug & GO: no additional software required, simply plug in and start:
Thanks to Power Delivery / QC 3.0, 2.0, the voltage and power are adjusted automatically.
• Be aware that, for efficient and optimised charging, your terminal device must support the
PD (Power Delivery)/QC 3.0, 2.0 function.
• If you have a large number of PD/QC-enabled devices with different firmware updates, it may be
that the function is not fully supported.
5. Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning
agents.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
4