Using The Remote Control - Concept VR3520 Manual Del Usuario

Aspiradora robótica
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 141
EN
WATER FLOW SETTING
You can adjust the water flow using the mobile app. The
water flow cannot be changed via the remote control. The
water flow will be set to a medium level. Use the mobile
app to adjust the water flow.
UV LAMP AND STERILIZATION
The UV lamp can also be controlled using the app and
remote control. For safety reasons, turn the lamp on only
with the dust container. Do not turn on the lamp with the
wiping module. During sterilization, the vacuum cleaner
shuts off the suction, halves the speed of the movement
and reduces the rotation speed of the of the main brush
and side brushes.

USING THE REMOTE CONTROL

1. Cleaning planning
2. Moving forward
3. Turning left
4. Local TURBO cleaning
5. Start/pause charging
6. Automatic cleaning / pause
7. Cleaning/pause
8. Turning right
9. Sterilization mode
10. Setting the suction power
1
2
3
4
5
Note: To ensure that all the correct settings are effective,
you must point the remote control at the front of the
robotic vacuum cleaner from close proximity.
Time setting
1. Press the button
on the remote control to enter
84
the time setting, the Sunday symbol flashes on the
LCD.
2. Press the left and right buttons to select the day of the
week and press the button
LCD will automatically switch to the clock setting.
3. Press the up and down buttons to set the hour and
press the left and right buttons to move to the minute
setting.
4. After setting the current time, point the remote control
at the front of the robotic vacuum cleaner and press
the button
do so will invalidate your settings.
5. This completes the time setting for both the remote
control and the robotic vacuum cleaner.
Cleaning plan
1. Press the button
the plan setting function, the Sunday symbol flashes
on the LCD.
2. Press the left and right buttons to select the day of the
week and press the button
LCD will automatically switch to the clock setting.
3. Press the up and down buttons to set the hour and
press the left and right buttons to move to the minute
setting. Then point the remote control at the front of
the robotic vacuum cleaner and press the button
to confirm this plan setting for the robotic vacuum
cleaner.
4. When one plan setting is completed, the remote
control automatically moves to the next plan setting.
If you do not want to continue with the setting, press
the exit button
to finish automatically.
5. This completes the time setting for both the remote
control and the robotic vacuum cleaner.
Cancelling the cleaning plan
6
1. Press the button
7
Sunday symbol flashes on the LCD and the symbols
8
for the days of the week you have planned appear.
2. Press the left and right buttons to select the day of the
9
week you have planned, and press and hold the button
10
for 3 seconds to cancel the plan. You can also select
the next planned day you want to cancel, or press the
exit button
finish automatically.
STERILIZATION MODE
1. Press the button
switch on the sterilization mode. Press the button
again to switch off the sterilization mode.
2. The robot turns on the UV light when in sterilization
mode and halves its speed for more thorough
to confirm it, then the
to confirm all time settings. Failure to
on the remote control to enter
to confirm it, then the
or wait 10 seconds for the setting
on the remote control, the
or wait 10 seconds for the setting to
on the remote control to
VR3520
Tabla de contenido
loading

Tabla de contenido