Dmx Address Setting - TECshow GOBO DERBY UV Manual De Usuario

10. DMX ADDRESS SETTING

• Each fixture must set a specific starting
address. When receiving signal, fixture will
receive channel control signals of this address
from the DMX controller.
• For easy to use, the user can set the same
address for several fixtures, also can set up a
unique address for every device.
• If you set the same address for all fixtures, all
the fixtures will receive from the same DMX
channels signal. All connecting fixtures are
11. PRODUCT SIZE
jointly controlled, controller can't separately
control a device.
• If you set a different address for each fixture,
each fixture will receive unique signal and can
be controlled by DMX controller separately.
• This fixture has 14 channels, you should set
the starting address of the first unit to 1, the
second unit to 9(1*8 + 1), the third unit to
17(2*8+ 1), and so on.
209
150
230
191,4
English version | Tecshow Gobo Dervy UV
P. 11