Controls And Display; Setting The Clock - Russell Hobbs Attentiv Manual

3. Tap the cold brew E icon.
4. Use the select/confirm knob to select full carafe C.
5. Press the select/confirm knob G to start the brewing cycle.
This will clean and prime your coffee maker ready for use.

CONTROLS AND DISPLAY

In general, to activate a function, touch its icon. The icon will light up brightly and the remaining icons will be dimly lit to
show that they are available for use.
Your coffee maker will revert to the standby mode if no controls are touched or settings changed within 5 minutes. You can
also select standby mode at any time by touching the C icon for 1 second. Your coffee maker will remember the last settings
selected.
An audible alert will sound at the beginning and end of each brewing cycle.
ICON FUNCTION
Power/Standby - Touch and hold for 1 second to switch on. Touch and hold for 1 second to enter standby
C
mode.
Settings - tap to access the clock set, timer or clean functions
L
Cancel - touch and hold for 1 second to cancel brewing
B
Clock set - tap Settings then tap to enter the clock setting mode
O
Timer - tap Settings then tap to enter the timed brewing mode. You can program a brewing cycle to occur at
P
a specific time.
Clean - tap Settings then tap to enter the cleaning mode
c
Warming plate active light - when lit, the warming plate is HOT!
Numerical display shows current time or the time that a brewing cycle has been programmed. After brewing,
88:88
it will count up for 40 minutes to show the amount of time the coffee has been on the warming plate.
Coffee strength - cold brew
E
Coffee strength - regular
b
Coffee strength - strong
A
Coffee strength - concentrate (shot)
F
Coffee volume light - full carafe
C
Coffee volume light - half carafe
D
Coffee volume light - travel mug
H
Coffee volume light - single cup
I
Confirm button. Press to start the brewing cycle.
G
Drip stop lever status light
J

SETTING THE CLOCK

You don't have to set the clock to make coffee but you will need to set it if you want to use the timer function of your coffee
maker.
1. If your coffee maker is in standby, touch and hold the C icon for 1 second.
2. Tap the setting L icon.
3. Tap the clock set O icon. The display will slowly flash.
4. Turn the select/confirm knob until the correct time is displayed (the clock is in 24 hour format). Turning the knob slowly
will increase or decrease the time in 1 minute steps. Turning it quicky will change the time in 15 minute steps.
5. Press the select/confirm knob G to accept the time.
6. The display will stop flashing and the time you have set will be displayed.
PREPARATION
1. Open the water tank lid (Fig A).
Fill the water tank with the desired quantity of cold, fresh water. Don't exceed the max markings (Fig. B).
2.
5
GB GB
DE DE
FR FR
NL NL
IT IT
ES ES
PT PT
DK DK
SE SE
NO NO
FI FI
RU RU
CZ CZ
SK SK
PL PL
HR HR
SI SI
GR GR
HU HU
TR TR
RO RO
BG BG
UA UA
AE AE