Configuration With The Balluff Engineering Tool (Bet); Balluff Engineering Tool (Bet); Connect Units - Balluff BTL PF Serie Manual De Instrucciones

BTL PF _ 400- _ _ _ _ -C15A _ _ _ _ - _ _ _ _ _ _
Magnetostrictive Linear Position Sensor – Profile Style
7

Configuration with the Balluff Engineering Tool (BET)

7.1

Balluff Engineering Tool (BET)

NOTICE
Interference in function
Configuration with the BET while the system is running
may result in malfunctions.
► Stop the system before performing the configuration.
With the PC software BET the BTL can be quickly and
easily configured on the PC (does not apply to
BTL PF_400-...S35).
The PC software and the relevant configuration
guide can be found online at www.balluff.com
on the product page.
16 english
7.2

Connect units

The units must be connected for configuration with the
BET (connector version see Fig. 7-1, cable
version see Fig. 7-2).
BTL connector version
PC (with BET)
IO-Link master
Power supply
Fig. 7-1: Connection of units with BTL connector version
► Connect BTL to the master via the adapter cable
(accessory).
► Optional: Also connect outputs to the control (PLC) via
the adapter cable.
► Connect PC (with BET) to the master.
BTL cable version
PC (with BET)
IO-Link master
Power supply
Fig. 7-2: Connection of units with BTL cable version
► Connect BTL cable to the master via the adapter cable
(accessory), e.g., using a connecting clamp.
Assignment of wire colors:
BTL cable Adapter cable, master
BN (brown) BN (brown)
BU (blue) BU (blue)
WH (white) BK (black)
► Optional: Connect outputs to the control (PLC) via the
adapter cable.
► Connect PC (with BET) to the master.
BTL
PLC
(optional)
BTL
PLC
(optional)