Oster CKSTSK1712 Manual De Instrucciones página 18

Sartén eléctrica
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

cause personal injury or damage to the appliance.
11. Select the temperature 250ºC and wait until the operation indicator light turns off.
12.Turn the temperature control button to the position " " and remove the plug from the
socket.
13. Wait for the appliance to cool down.
14. Clean again the non-stick surface of the skillet, in accordance with chapter "Cleaning
and Conservation"
Using your Electric skillet
Your Electric skillet is easy to use. You should just follow the instructions and attentive to
the suggestions.
1. Turn the temperature selector button to the position " ".
2. Connect the thermostat adjusting the guide pin in the hole in the center of the junction
box.
3. Check that it is firmly seated. Otherwise, there may be an abnormal warming which can
cause personal injury or damage to the appliance.
4. Clean the nonstick surface with a damp cloth and dry with a cloth or paper towel.
5. Connect the appliance into the socket.
6. Select the adequate temperature for the food to prepare.
7. After a few minutes the temperature reaches the set level and the indicator turns off. You
can adjust the temperature control button to increase or decrease the temperature of the
plate as needed for the dish in preparation.
8. During the preparation the warning led will turn off and turn on indicating that the
temperature is being maintained by the resistances through the thermostat.
Note
The cooking time varies according to the type of food and your personal taste. After
preparation, the food can be kept warm using the position Simmer.
9. After prepared the food, turn the temperature control button to the position Desl. and
remove the plug from the socket.
10. You can bring your Electric skillet to the table. For it turn the temperature selector to the
position " " remove the power plug and disconnect the thermostat.
11. It is not recommended to use the Electrical Pan on temperature-sensitive surfaces.
Attention! Be careful not to touch the guide pin. It is very hot during the use.
E n g li s h 7

Hide quick links:

Tabla de contenido
loading

Tabla de contenido