afriso AFA 11 Manual De Instrucciones página 77

EN
9 V monobloc battery (optional for signal in the case 
5.5.6
of power outage)
If a battery is connected, a signal sound is activated in the case of a power
outage. The signal sound cannot be acknowledged; it remains on until
mains supply voltage is available again. When mains supply voltage is
restored, the product immediately resumes operation. If an alarm has
occurred in the meantime, this is indicated.
5.5.7 Retrofitting an EnOcean® wireless module (optional)
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
Failure to follow these instructions will result in death or serious injury.
ELECTROSTATIC DISCHARGE
• Always earth yourself before touching electronic components.
• Do not touch the EnOcean® wireless module to plug it in; use the anti-elec-
trostatic film to plug it into the slot.
Failure to follow these instructions can result in equipment damage.
26
A
AFA 11
Mounting
1. Open the cover of the battery
compartment using a slotted
screwdriver (A).
2. Connect a 9V monobloc battery
(optional).
3. Push the 9 V monobloc battery
into the battery compartment (ver-
ify correct mounting position).
4. Close the cover of the battery
compartment.
DANGER
NOTICE