Setting The Operating Mode - afriso AFA 11 Manual De Instrucciones

EN
Mounting
5.5.4

Setting the operating mode

The product is factory-set to the operating mode "Eco" (see Page 12).
If you operate the product in the operating mode "FailSafe", you must
change the position of the jumper on the PCB.
Verify that the mains voltage is interrupted and cannot be switched on.
1. Open the control unit.
2. Plug the jumper onto the contacts for the operating mode to be set.
A
B
A. Operating mode "Eco" B. Operating mode "Failsafe"
3. Close the control unit.
24 AFA 11