afriso AFA 11 Manual De Instrucciones página 71

EN
5.5.1 Power supply control unit 230 V
Verify that the product is connected to mains by means of a suitable,
Verify that the power supply to the control unit is separately fused (16 A
3
2. Route the mains cable through the left cable gland into the control unit.
3. Connect the phase to terminal L and the neutral conductor to
20
permanently installed cable (for example, NYM-J 3 x 1.5 mm²).
maximum).
1
4
terminal N.
- The protective ground conductor (PE) does not have to be connected.
AFA 11
Mounting
2
5
1. Open the control unit.