Installation; Installation Prerequisites; Ice Machine Dimensions; Clearances - Manitowoc CrystalCraft Premier Manual De Instalación, Operación Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Installation Prerequisites

• Must have open site (gravity) drain available or purchase
optional drain pump (see Water Supply and Drain
Requirements).
• Must have a grounded, polarized electrical power
supply on a dedicated electrical circuit (only appliance
on circuit). If GFCI (ground fault circuit interrupter) is
required by your local electrical code, it must be breaker
type, not outlet type (see Electrical Service).
• Must have cold water supply line available at Ice Machine
(see Water Supply and Drain Requirements).
• Clearance and air temperatures must be met (see
Location of Ice Machine).
• If built into a cabinet, ice machine must be removable
for yearly cleaning procedure (see Interior Cleaning and
Sanitizing in section 3).
Part Number 000016662 Rev Rev 01 01/22
Section 2

Installation

Ice Machine Dimensions

Clearances

The ice machine may be built into a cabinet. There is no
minimum clearance requirement for the top or sides of the
ice machine.

Minimum Cut-Out For Built-In Installations

Height
35" (89 cm)
23"
14.75"
Width
15" (38 cm)
33.5"
Depth
26" (65 cm)
9
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Use0050

Tabla de contenido