Venga VG M 3015 Manual De Instrucciones página 19

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Important information
To achieve the best results when pureeing solid ingredients, place small portions into
the jar one by one instead of placing a large quantity all at once.
If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
When mixing solid ingredients, start off first with a small amount of liquid. Gradually
add more and more liquid through the opening in the lid.
Always place your hand on top of the blender when you are operating the device.
For stirring solid or very thick liquid ingredients we recommend that you use the
blender in pulse mode to prevent the blades from being stuck.
Operate the motor for a maximum of 1 minute to prevent overheating or
consequent damage.
It is advisable to wash the appliance before using it for the first time.
Clean the appliance after each use, thereby avoiding liquid incrustations.
The switch does not permanently engage in the 'P' setting. You have to hold the
switch in the 'P' setting
CLEANING
Remove the plug and allow the appliance to cool down before cleaning it.
Do not immerse the motor section of the appliance in water and make sure no water
enters the appliance.
Clean the motor section by wiping it with a damp cloth. A little detergent can be
added if the appliance is heavily soiled.
Do not use scouring pads, steel wool or any form of strong solvents or abrasive
cleaning agents to clean the appliance, as they may damage the outside surfaces
of the appliance.
Take the appliance apart and clean all of the accessories separately.
Be careful not to touch the blades or sharp parts during use and cleaning.
IMPORTANT! Allow to dry fully after cleaning before using again.
After washing and drying, immediately place the accessories into the protective
sleeve for storage.
INFORMATION
Capacity of the bowl : max. 1kg of flour and 600ml water.
Capacity of the blender: max 1.5L.
Do not overfill the appliance.
Adding water during the mixing process : ensure it's 40+/-5 °C.
19
VG M 3015
Tabla de contenido
loading

Tabla de contenido