Use; Side Transfer; Frontal Transfer - B+B Pyro Start Plus Manual De Instrucciones

Pyro Start Plus Pyro Start Plus | Lightweight wheelchair | Lightweight wheelchair
Pyro Start Plus SL Pyro Start Plus SL
| Special sizes | Special sizes

7. Use

7.1. Side transfer

• Make sure that the sides of the wheelchair and the current or future
seat surface are as close to each other as possible.
• If you are transferring from another wheelchair or indoor frame,
secure these by applying the parking brakes.
• Secure the wheelchair using the parking brake (see Chapter 4.7.1).
• If necessary, swing the armrest backwards or remove the sideguard
(see Chapter 4.5).
• Flip both footplates up, swing them to the side and remove them
(see Chapter 4.2).
• Slide sideways onto the other seat surface. When doing this sit as
far back as possible.
• Move the legrests back into their original position.
• If necessary lock the sideguards back in place.

7.2. Frontal transfer

• Remove the legrests (see Chapter 4.2).
• Make sure that the front of the wheelchair and the current or future
seat are as close to each other as possible and apply the parking
brakes on both sides (see Chapter 4.7.1).
72 72
Never stand on the footplate and when swinging it
away, there is a Risk of tipping over!
Never stand on the footplate and when swinging it
away, there is a Risk of tipping over!
Lightweight wheelchair | Lightweight wheelchair |
Special sizes | Special sizes |
• If you are transferring from another wheelchair or indoor frame,
secure these by applying the parking brakes.
• Now slide onto the seat surface by rotating your body.
• Then hang the legrests back into the initial position and flip the
footplates down.
Bischoff & Bischoff GmbH |2022-07-20- Revision: 2
Pyro Start Plus Pyro Start Plus
Pyro Start SL Plus Pyro Start SL Plus
73 73