CARLO GAVAZZI WM50 Manual De Instrucciones página 26

1. Set tariff management via internal calendar and clock.
2. Set the date and time.
3. From UCS desktop, set the tariff calendar, setting:
default tariff to be applied for the periods when no tariff is set
o
weekends and the relevant tariff
o
tariff to be applied on working days (up to six daily intervals, for two periods)
o
current year holidays, manually or automatically set
o
Managing tariffs via digital input
1. Set tariff management via digital input.
2. Set digital inputs 1, 2 and 3 with tariff function.
3. Change the tariff by changing the input status according to the following table (0 = open contact, 1 = closed contact):
Current tariff Digital input
1 0
2 1
3 0
Disabling tariff management
Set tariff management as disabled or enter 6 in the 143Fh register.
From WM50: See "Settings from WM50" on page 29, sub-menu Tariff and Dig in x.
Database
Introduction
Database can be exported to .xls file and databases and single variables, events and values to be saved can be enabled/disabled
from UCS.
CAUTION! If database settings are changed, previously saved data is deleted.
Database content
Database Description
Main line Recording of minimum, maximum
electrical and average values of main line
variables variables selectable by the user.
Main unit Recording of main unit events and
events alarms
Digital input Digital input
1 2
0 0
0 0
1 0
Data recorded for each record
l
l
l
l
l
l
l
l
l
Current tariff Digital input
3
4
5
6
Record ID
Time stamp *
Type (min, max, average)
Variable
Value
Record ID
Time stamp *
Type (on, off, configuration change, programming login, new minimum,
maximum, maximum among average values reached, value reset,
meter/totalizer reset, database reset, digital input/output status change)
Variable associated with the event
WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
Essential information
Digital input
1 2
1 1
0 0
1 0
Digital input
3
0
1
1
25