Information Menu - CARLO GAVAZZI WM50 Manual De Instrucciones

Information Menu

Page title Information displayed
12345678
Conn
Note
Pulse out x
Remot out (3 pages) Outputs set as remote control and relevant status
Warning TCD12 warnings:
Al x
Optical Baud rate of optical port
Com port Modbus address
Baud rate of RS485/RS232 port
IP address IP address
Date Date
time Hour
Data events
Number of events recorded in the main unit event database.
Serial number (page title)
l
Year of manufacture
l
Firmware revision
l
Average value calculation interval (dmd)
l
System type (in title)
l
Current transformer ratio (Ct)
l
: any neutral current transformer ratio is not displayed.
x = output number (in title)
l
none: output not set as pulse output
l
If the output is set as pulse output, it displays:
l
Associated energy meter
l
Pulse weight
l
none: no warnings
l
E001: channels associated to a phase not foreseen by the set electrical system
l
E002: two-phase or three-phase load set with two channels associated with the same phase
l
E003: set load inconsistent with the set electrical system (i.e.: three-phase load, two-phase
l
electrical system)
x = alarm number (in title)
l
Alarm data x (in title):
l
None: alarm disabled
l
Virt: alarm enabled but not associated with any output
l
Out x YY: alarm enabled, associated with digital output x with normal YY output status (ND =
l
normally open or NE = normally closed)
Controlled variable
l
Alarm activation threshold (Set 1)
l
Alarm deactivation threshold (Set 2)
l
Alarm type:
l
Symbol
Up
Down
Description
WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
Symbol Description
Out of window
In window
WM50 use
17