Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3-1. How to Assemble Juicer: Assembly and Dis assembly of Silicone
* Packings are consumables that are recommended
to be replaced once every 6 to 12 months. They are
available for purchase through the Customer Service
Center.
(The juice may leak if the product is not assembled
properly.)
Extraction Packing
01
01
02
02
01
01 Hold and take out the packing as if you are pulling it
back.
02 After cleaning, insert the packing as shown in the
02
figure and then press it down.
Seal Packing
01
01
02
02
01
01 Hold and take out the packing as if you are pulling
it back.
02
02 After cleaning, insert one side of the packing first
as if you are hooking it.
03
03 Insert the remaining part and press down the
perimeter.
Juice Cap Packing
01
01
⑦-3
⑦-3
02
02
⑦-3
⑦-3
Hopper Packing
⑦-4
⑦-4
Assemble the packing as shown in the figure.
Chamber Packing
⑦-4
⑦-4
01 Grab one side and pull it back to detach it.
01
02 After cleaning, check the top and bottom of the
02
packing and insert it as if you are hooking one side.
03 Firmly press the remaining part of the packing
03
without any folded area to assemble.
After cleaning, insert one side of the packing
first as if you are hooking it.
Insert the remaining part and press down the perimeter.
②-4
②-4
07
⑦-7
⑦-7
⑦-6
⑦-6
Tabla de contenido
