Tabla de contenido
Corded
Buttonhole
Use the same procedure
as #12 square buttonhole.
(see page 44)
Set the stitch width to match the thickness of the
cord used.
With the buuonhoie
foot raised, hook the filler
cord on the spur at the hack of die buttonhole
foot.
Bring the ends toward you tinder the buttonhole
foot, clearing die front end.
Hook the filler cord into the forks on the front of
automatic
buttonhole
foot R to hold them tight.
Lower the needle into the garment where the
buttonhole
will start and lower the foot.
Depress the foot control gently and sew the
buttonhole.
Each side of the buttonhole
and rhe
bartacks will be sewn over tile cord.
Remove the fabric from the machine and cut the
sewing threads only.
(_ Tension
(_) R: BH foot
(_) Spur
([_) Needle thread
(_) Bobbin thread
.%
Pull the left end of the filler cord to tighten
it.
Thread the end through
a darning
needle.
Draw to the wrong side of the fabric and cur.
*
To cut the buttonhole
opening,
refer to the
instructions
on page 46.
5O
Tabla de contenido
