Tabla de contenido
Setting
Stitch Length
and Left/Right
Needle
Position
• Manual Stitch Length
• These settings apply only to "straight"
stitch
patterns
1 through
3.
Press the _
key to adjust the stitch length
manually.
Use the [[_
or [[[D keys (on the right) to
adjust the stitch length. To decrease length, press
the[_
key. To increase length, press the [[_
key,
The pre-programmed
stitch length setting is
suitable for most of your sewing needs. However,
you can change these settings to accommodate
different fabric characteristics or achieve a desired
effect. Hold down the [[_] or [[[_] key until you
reach the desired setting.
* The reverse stitch length cannot be set longer than
2.5 mm (1/8").
Press the [[_
key again to return the visual much
screen to the former display.
• Variable Needle Position
When you select stitch patterns 1 through 3 (see
bottom of box on righ0, you can adjust the left/right
needle position. When you press the [_
key, the
needle position will move to the left.
When you press the [_
key, the needle position will
move to the right.
@DLeft (0.0)
(_) Middle (3.5)
(_) Right(7.0)
Note:
When using a sttaight stitch foot, make sure to
use center needle position (_).
Otherwise the needle may break.
2.2
[GBEE]I
lcB J
t
__!
L
f
I
Left
Middle
Right
Izqttierda
Centro
Derecha
Gauche
Milieu
Droite
=3
@
@
®
@@@
=0
34
Tabla de contenido
