Blendtec PROFESSIONAL Serie Manual Del Propietario Y Guía Del Usuario página 7

4.2.1 INSTALLATION
1� Select a location for the blender that is near an electrical outlet and which allows
enough room above and around the unit to allow for unobstructed movement
of the sound enclosure (see Figure 5 for measurements)�
2� Place the blender on a flat, clean and dry surface� Blender vents on the sides
and exhaust on the back should be unobstructed to allow proper cooling dur-
ing use�
3� Plug the unit into an outlet with appropriate electrical protection�
FIGURE 4. BLENDER MOTOR BASE
Control Surface
Capacitive-touch LED
interface with intuitive
control icons and
information screen�
Motor Housing
Houses all components
and optimises sound and
airflow for cooler, quieter
operation� Never remove
the motor housing�
Lid
Jar
Blade Assembly
FIGURE 6.
SOUND ENCLOSURE
10
Drive Socket
Direct drive coupling with the jar
blade shaft� The socket has a
lifetime warranty�
Blender Motor
Contains the machinery that runs
the blender, including the electric
motor and drivetrain�
Clear Vented
Cap Insert
FIGURE 5.
BLENDER JAR ASSEMBLY
FIGURE 7. BLENDER DIMENSIONS
4.2.2 QUICK RECIPE INSTRUCTIONS –
USE THESE STEPS TO GET STARTED RIGHT AWAY.
1� Choose a recipe and gather ingredients (try blendtec�com/recipes)
2� Load the blender jar and secure the lid tightly�
3� Place the jar onto the motor base and ensure power is turned on�
4� Close the sound enclosure lid and press the appropriate blend icon�
5� Enjoy!
For best cleaning results, clean immediately after blending�
(See CARE AND CLEANING, 5� 1 )
4.2.3 PROFESSIONAL 800™ INTERFACE
Power Capacitive Touch Slider
Mode
Pre-programmed Blend Cycles
Cancel/Exit
Pulse
11