English; Important Safety Information; Intended Use - 3M 88757 Manual De Instrucciones

página de 167

/ 167
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

English

Original Instructions

ELECTRIC RANDOM ORBITAL SANDER INSTRUCTION MANUAL

127 mm (5 in), 152 mm (6 in)

4,000/min – 10,000/min (RPM)

100-130 VAC 60 Hz., 220-240 VAC 50-60 Hz.

Please read, understand and follow all safety information contained in these instructions prior to the use of this tool. Retain these instructions for future reference.

This power tool is intended for use in workplaces, and only by skilled, trained professionals in accordance with the instructions in this manual. This electric tool

is designed to be used with a disc pad and appropriate abrasive for sanding metals, wood, stone, plastics and other materials. It should only be used for such

sanding applications and within marked capacity and ratings. Only accessories specifically recommended by 3M should be used with this tool. Use in any other

manner or with other accessories could lead to unsafe operating conditions.

Do not operate tool in water or in an excessively wet application.

Do not use disc pads that have a Max RPM or Max OPM less than the tool Max RPM or Max OPM rating. Never use disc pads that have a weight and/or size

different from what the tool was specifically designed for.

WARNING: Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury and/or property damage.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or property damage.

NOTICE: Indicates a situation which, if not avoided, could result in property damage.