Mounting The Blade - pellenc HELION 2 Manual De Instrucciones

4.2. MOUNTING THE BLADE

Caution
Before working on the tool, check that the battery On / Off switch is in the off position «0» and
disconnect the battery power cable.
Caution
Only ever use blades supplied by PELLENC to avoid the risk of injury.
Warning
Running-in of the blade must be done for 1 minute at each change of the blade in a dry run.
Check the tightness of the blade after running-in.
ELECTRIC HEDGE-TRIMMER HELION 2 COMPACT
54_117575-J
47