Description Of The Washer-Dryer And Starting A Wash Cycle; Control Panel - Hotpoint ARMXXF 1690 Instrucciones De Uso

Description of the washer-dryer
and starting a wash cycle

Control panel

GB
Detergent dispenser drawer: used to dispense
detergents and washing additives (see "Detergents and
laundry").
ON/OFF button with indicator light: switches the machine
on and off.
If the indicator light is illuminated, this indicates that the
machine is switched on.
WASH CYCLE knob: programmes the wash cycles. During
the wash cycle, the knob does not move.
DRYING button: used to set the desired drying program-
me (see "Personalisation").
TEMPERATURE button: sets the temperature or the cold
wash cycle (see "Personalisation").
DISPLAY: indicates the time remaining for the selected
wash cycle and, if a delayed start has been programmed,
the time remaining until the start of the wash cycle.
CHILD LOCK button with indicator light: activates or
deactivates the control panel lock.
FUNCTION buttons with indicator light: used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.
4
All manuals and user guides at all-guides.com
ON/OFF
button with indicator
light
Detergent dispenser drawer
WASH CYCLE
WASH CYCLE PROGRESS
DISPLAY
TEMPERATURE
button
DRYING
FUNCTION
button
buttons with
indicator lights
knob
CHILD LOCK
button with indicator light
WASH CYCLE PROGRESS indicator lights: used to
monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is in
progress.
DOOR LOCKED indicator light: indicates whether the
door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tem-
porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash orange,
while the indicator light for the current wash cycle phase
will remain lit in a fixed manner. If the DOOR LOCKED
indicator light is switched off, the door may be opened
(wait approximately 3 minutes). To start the wash cycle
from the point at which it was interrupted, press this button
again.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
Consumption in off-mode: 0,5 W
Consumption in Left-on: 8 W
indicator lights
DOOR
LOCKED
indicator light
START/PAUSE
button with indicator
light