Etac Molift Raiser Pro Manual De Usuario página 7

The wheels must always be locked when the user
stands up and sits down.
3
Brake unlocked
3. Release the brake with one
foot.Pull the Molift Raiser
backwards and then steer
it toward the new seating
position. Make sure that any
wheels are locked in the new
seating. The transfer is best
done with the user faced in
the direction of travel.
The carer must always counter balance the weight of the
user when she/he stands up or sits down.
Transport and storage
Molift Raiser Pro can be stored and transported under temper-
atures between -25 - 70°C and relative humidity between 15 -
93%. Don`t use the Molift Raiser Pro for transportation of goods.
User / Assistant
The assistant has to be able to handle the weight of the user.
4
Brake locked
4. Lock both wheels. Place a
foot on the edge of the foot-
plate before the user sits down.
Counter balance while the user
sits down. Maintain eye contact
with the user during the entire
transfer Process.
Molift Raiser Pro / BM43099 Rev G / www.etac.com
Make sure the users weight is close to the center of the base
plate.
Accessories
Cleaning and disinfection
Clean on a regular basis. Clean surfaces with a damp cloth using
an appropriate pH-neutral detergent. Do not use solvents or
strong liquids, this may damage surfaces on the Molift Raiser Pro.
For disinfection when needed; use isoPropyl alcohol or similar.
Avoid abrasive cleaning Products. Remove hair and pile from the
wheels, verify that the wheels rotates freely and brakes functions
Properly. Make sure not to damage or remove labels when
cleaning.
Reconditioning
Follow cleaning and assembly Procedure. Separate reconditioning
document is available at Etac.com.
Recycling
Molift Raiser Pro can be disposed of as metal and plastic waste.
Recycling instructions is available at Etac.com
Spare parts
A list of spare parts is available at Etac.com.
7
Molift Raiser Soft Handels
Molift Raiser Strap
Molift Raiser Strap +
Molift Raiser Belt
Molift Raiser Pro Heel Strap
Molift Raiser Pro Block